site banner
PaperclipPerfector  1mo ago (text post)   2878 thread views

Small-Scale Question Sunday for September 15, 2024

Do you have a dumb question that you're kind of embarrassed to ask in the main thread? Is there something you're just not sure about?

This is your opportunity to ask questions. No question too simple or too silly.

Culture war topics are accepted, and proposals for a better intro post are appreciated.

1
Top Bottom Old Controversial Comments
Jump in the discussion.

No email address required.

Aluminium foil, to wrap up electronics (including aforementioned radio) to protect from EMP (don't have this yet)

I don't think that is how EMP shielding works. Also would your electronic need to be shielded before hand, so having materials to shield them later is irrelevant?

I don't think that is how EMP shielding works.

It is. Nuclear EMP is a (very powerful) radio burst; you shield against that by putting the item in a Faraday cage - an enclosure of conductive material (which, when exposed to EM fields, will generate transient currents that cancel out the field inside it; this is why phones don't work very well inside metal vehicles). Aluminium foil is conductive (aluminium is, in fact, frequently used for power transmission, as it's the most conductive material per mass short of superconductors), so it works, although because you can't exactly seal it into a solid enclosure without significant equipment, you need multiple layers at different angles and you ideally want the items to be relatively small.

(The use of metal foil to block EM radiation is the reason that literal "tinfoil hats" were invented; the physical principle's sound, although of course the schizophrenics' worry about people mind-controlling them with radio waves is nonsense, and Faraday cages need to completely or almost-completely surround the shielded item so a "hat" isn't really that effective.)

Also would your electronic need bmto be shielded before hand, so having materials to shield them later is irrelevant?

Correct, but a) some items, like the emergency radio, aren't useful outside a crisis, so you can just keep them wrapped up permanently; b) nuclear war usually comes out of an existing military conflict, which means that upon hearing about said conflict (WWII was not secret; the Cuban Missile Crisis was not secret; Able Archer 83 and the Soviet concern about it was AFAIK not secret) you can wrap things up then against the possibility of EMP attack.

I get that encasing something in aluminum with no gaps would shield it. Aluminum is the fourth most conducive metal and a good shielding design made out of aluminum would work.

But merely wrapping something in aluminum foil would leave small gaps that I think would defeat the shield. I get that you'd overlap the aluminum layers and not have large gaping holes, but I don't think that's good shielding. I sometimes deal with EMI issues at work and it is much harder than you'd think to shield parts. "Wrap it in foil" is not a clear path to success. I have literally seen parts wrapped in foil in misguided attempts to shield them. They were really quite leaky from an EMI point of view. "Put it in a metal enclosure whose lids or openings are sealed with metal EMI gaskets" is what actually works.

I think if the typical person tried shielding a radio with aluminum foil, they would screw it up.

Aluminum is the fourth most conducive metal

It depends on how you're counting it. Resistivity is usually measured by dimensions, and aluminium's #4 by that measure, but aluminium is far less dense than copper/silver/gold, so if your limiting factor is weight (often the case) aluminium is the best.

But merely wrapping something in aluminum foil would leave small gaps that I think would defeat the shield.

There's leakage, yes. But everything I've read suggests that you can achieve very high reduction with enough layers, and "very high" suffices (one only needs to bring the voltage inside below that needed to destroy the device, after all - it doesn't have to be brought to zero).

your limiting factor is weight (often the case) aluminium is the best

I didn't think about that. That's actually a good point.

"With enough layers" would be the key. Not merely wrapping with a bit of overlap, which I think the typical person would mistakenly do. Multiple layers offset or wrapped in different directions. And having a DC path to ground would defeat charge buildup.

I my work I seal things correctly by putting copper tape over the cracks and joints. 3M sells it. The conductive adhesive is only good for one or maybe two sticks though. EMI shielding goes to shit if the tape is even slightly lifted or the adhesive not quite sticking on well.

And also bare metal boxes with EMI gaskets. Which if you really wanted to shield your stuff you should use.

"With enough layers" would be the key. Not merely wrapping with a bit of overlap, which I think the typical person would mistakenly do. Multiple layers offset or wrapped in different directions.

Yes, there's a reason I bought 60 metres of the stuff. Still under 10 bucks.

But merely wrapping something in aluminum foil would leave small gaps

I wouldn't worry about small gaps.

No, he's at least partially right.

Nuclear EMP is not the same thing as an electric arc; it's a massive burst of radio waves that induces currents inside devices. Gaps do matter. That's why you need multiple layers, so that there's metal connected between any two given directions (ideally closed circuits, to cancel the magnetic component as well as the electrical one).

What is this place?

This website is a place for people who want to move past shady thinking and test their ideas in a court of people who don't all share the same biases. Our goal is to optimize for light, not heat; this is a group effort, and all commentators are asked to do their part.

The weekly Culture War threads host the most controversial topics and are the most visible aspect of The Motte. However, many other topics are appropriate here. We encourage people to post anything related to science, politics, or philosophy; if in doubt, post!

Check out The Vault for an archive of old quality posts. You are encouraged to crosspost these elsewhere.


Why are you called The Motte?

A motte is a stone keep on a raised earthwork common in early medieval fortifications. More pertinently, it's an element in a rhetorical move called a "Motte-and-Bailey", originally identified by philosopher Nicholas Shackel. It describes the tendency in discourse for people to move from a controversial but high value claim to a defensible but less exciting one upon any resistance to the former. He likens this to the medieval fortification, where a desirable land (the bailey) is abandoned when in danger for the more easily defended motte. In Shackel's words, "The Motte represents the defensible but undesired propositions to which one retreats when hard pressed."

On The Motte, always attempt to remain inside your defensible territory, even if you are not being pressed.


New post guidelines

If you're posting something that isn't related to the culture war, we encourage you to post a thread for it. A submission statement is highly appreciated, but isn't necessary for text posts or links to largely-text posts such as blogs or news articles; if we're unsure of the value of your post, we might remove it until you add a submission statement. A submission statement is required for non-text sources (videos, podcasts, images).

Culture war posts go in the culture war thread; all links must either include a submission statement or significant commentary. Bare links without those will be removed.

If in doubt, please post it!


Rules


Recommended Posts And Communities

Recommended Realtime Chats